Current website record with its source, version and qualifications. This is not an approved order specification.
Download specification summaryConfiguration reference
400–500 MHz100 W Power class
- Supply
- 28V
- Dimensions
- 150 × 80 × 23 mm
Power class from the technical catalogue. The output definition and guaranteed performance are agreed in the project quotation. Conditions & evidence →
WhatsApp · JohnHardware examples

Technical overview
- Frequency range
- 400–500 MHz
- Power class
- 100 W
- Supply
- 28V
- Dimensions
- 150 × 80 × 23 mm
- Current
- ≤8A
- Output isolator
- Included
- Supply format
- RF PA module
- Gain (source Max)
- Confirm for your configuration
- In-band ripple (source Peak)
- Confirm for your configuration
- Input port VSWR
- Confirm for your configuration
- Output port VSWR
- Confirm for your configuration
- Enable control (source wording)
- Confirm for your configuration
- RF input power
- Confirm for your configuration
- Control interface / protocol
- Confirm for your configuration
- Weight
- Confirm for your configuration
Conditions & evidence
Values below retain the source wording and qualifiers. Max gain is not a linear-gain guarantee; port VSWR is not a permitted load-mismatch rating. Enable voltage does not establish a control protocol. Working temperature does not define a thermal design. Missing fields require confirmation for this configuration.
Temperature protection (source wording)
Confirm for your configuration
Working temperature (source wording)
Confirm for your configuration
Gain / power stability
Confirm for your configuration
Cooling and mechanical integration
Request a matched drawing, mounting and cooling requirements for the agreed build and operating conditions.
Output power definition
Power class from the technical catalogue. The output definition and guaranteed performance are agreed in the project quotation.
Operating conditions
Catalogue current entry; confirm duty cycle and acceptance conditions.
Configuration reference prepared 9 November 2026. Final specifications are confirmed in the project quotation.
Website data version: web-5d2bd4fcc065Source / date: 100 W technical catalogue / 2026-10-13 compilation; supplier revision not supplied
INTEGRATION REVIEW
Confirm the signal path before you select.
Band and power are only the first check. Agree how RF enters the assembly, how it is installed and how your controller connects.
These are document requests, not confirmed features. RS485 does not establish Modbus compatibility; alarm telemetry does not establish automatic shutdown.
Before you integrateThe mounting surface and coolingWatch film · 0:11Documentation & open items
Check what this website record supports before planning a sample. Red items need matched evidence or confirmation; they are not approved specifications.
Not supplied in this website record.
No matched test report is included in this record.
Envelope dimensions are listed; matched mounting drawings and thermal requirements remain unconfirmed.
A complete matched pinout, input limits, protection actions and reset sequence remain unconfirmed.
Model- and quantity-specific sample terms, MOQ, lead-time basis and warranty require confirmation.
Adds these open items to the editable enquiry on this page. Nothing is submitted automatically.
ENGINEERING / PROCUREMENT
Questions about this configuration
FAQ revision: 2026-11-17.1
Website data revision — not a hardware revision: web-5d2bd4fcc065
100 W technical catalogue / 2026-10-13 compilation; supplier revision not supplied
Does this reference cover my entire frequency interval?
The recorded interval is 400–500 MHz. Candidate screening checks whether this single reference contains both ends of your requested interval. This is a frequency check, not proof of minimum output, linearity or engineering suitability throughout that interval.
Evidence and next stepDoes the 100 W class guarantee that output at every frequency?
No full-band output guarantee is established by this catalogue power class. CW, P1dB, saturated and modulated average power are different definitions. Specify your required minimum, signal, duty cycle, temperature and measurement conditions for engineering review.
Evidence and next stepWhich revision should I use when comparing files or requesting a sample?
Use website data revision web-5d2bd4fcc065 when referring to this page. It identifies the public record, not the manufacturer's hardware or firmware revision. Confirm the formal part number and matched specification, drawing and test versions before accepting another file as a replacement.
Evidence and next stepAre drive, control and cooling requirements confirmed for this module?
Use only the fields and conditions shown for this reference. Missing drive, connector, cooling, protocol or protection details remain open for review. Do not transfer a pinout, RS485 command set, input architecture or alarm/shutdown behaviour from another configuration.
Evidence and next stepHow do I request the missing documents for this exact configuration?
Use the documentation requests and editable enquiry on this page. Include the configuration revision, quantity, required documents, acceptance conditions and next step. The server validates the current public version when saving the enquiry; only a successful save returns an enquiry reference.
Evidence and next stepLET’S DEFINE YOUR CONFIGURATION
Send Your Requirements
A few details are enough to start. Add a specification if you have one.
john@jwrfpa.comWhatsApp · +86 153 2387 6241
Before you sendWhat to include in an RF module enquiryWatch film · 0:10